Neues von BrainFPV – RADIX 2 mit H7 CPU

BrainFPV stellt die RADIX V2 vor.

Bekannt wurde die RADIX durch Ihr ausgewöhnliches OSD.

Nur gibt es die in der V2 version mit einer H7 CPU!

Die technischen Daten sind:

H7 based 30 x 30 flight controller with full graphic OSD

Includes:

  • RADIX 2 flight controller
  • Sweet stickers
  • Silicone anti-vibration grommets 4x
  • 5-pin cable for motor outputs 5 to 8
  • BrainFPV 4-in-1 ESC cable kit (cables and connectors to make a cable that works with any 4-in-1 ESC with a JST-SH 7 pin, 8 pin, or 10 pin connector)
  • New Processor: STM32 H7 processor running at 480 MHz with 1 MB RAM
  • New Gyro: New Bosch Sensortec BMI270 gyro / accelerometer delivering superior flight performance
  • New Baro: Latest generation Bosch Sensortec BMP388 barometer accurate altitude readings
  • Better OSD: Improved full graphical on-screen-display (OSD) with gray levels and transparency
  • Dual camera input: Camera can be switched using a switch on the RC transmitter
  • VTX pit switch: to turn on/off the video transmitter. Voltage for VTX can be 5 V or the battery voltage. Switch has an integrated high-speed resettable fuse to prevent damage due to accidental shorts
  • 32 MByte built-in flash memory: 30 MByte available for logging and settings storage
  • Driverless flashing with the BrainFPV USB mass storage bootloader. Simply copy the firmware file to the flight controller when connected to your computer. No more messing with DFU drivers
  • RGB status LED with customizable color
  • 8 motor outputs: all supporting bi-directional DSHOT for RPM filtering. All outputs are available on connectors for easy connection of one or two 4-in-1 motor controllers (ESC’s).
  • 6 serial ports (UARTs): all with integrated inverters for S-BUS and other inverted protocols
  • I2C port for external sensors
  • RGB LED output
  • Buzzer output
  • Camera control output for configuring analog cameras
  • Analog RSSI input
  • 5 V regulator with 1.5 A output and up to 8S (35 V) input voltage
  • USB Type-C connector
  • Size: 37 x 37 mm (30.5 mm hole spacing)
  • Weight: 7g

Ich bin auf die Ersten Feedback gespannt.

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert